Hubbell's Polycast 700 Series is the logical trench drain choice for heavy duty applications with constant fork trucks or heavy equipment. The Polycast 700 features 6.25" wide (OD) polymer concrete channels with a 0.6% built-in slope that offers flow rates of 470 GPM. Polycast 700 is based on the 600 series channel, and so shares many of the features that make Polycast 600 a prominent small commercial drain.
The Polycast 700 framing technology sets the heavy duty system apart from other polymer concrete drains. Cast iron or high density polyethylene frames significantly increase the system’s load bearing capabilities by transferring pressure into the surrounding concrete. The 700 Series framing system also protects the underlying polymer concrete channel from weathering and freeze-thaw deterioration.
When added to the 600 series channel, each 700 Series frame adds 1.19" of additional depth to the channel invert. Polycast 700aa and 700pe frames are designed to allow the same 600 series grates to be used in the 700 Series frames.
Polycast 700aa HARDNOSE Frame
Reinforce your Polycast trench drain with a heavy duty cast iron frame. Combine the Polycast 700aa Hardnose frame with a Polycast cast iron or ductile iron grate for most common commercial applications. To achieve the highest load class rating, Class F, install your trench drain system with DG0700aa cast iron frames in conjuction with the DG0641D ductile iron slotted grates or covers.
Polycast 700pe DURAGUARD Frame
Add durability and chemical resistance to your polymer trench drain with the Polycast 700pe HDPE frame. Install the DG0700PE HDPE frame with reinforced stainless steel or fiberglass grating to make a high load capacity, inert drainage surface. Or, couple the HDPE frame with a cast or ductile iron slotted grate to unlock Class E loadbearing capable of standing up to fork truck traffic.
- Heavy Duty Industrial Areas
- Parking Lots & Garages
- Ports and Ship Yards
- Loading Docks
- Military Bases
- Truck Stops
- Gas Stations
- Chemical Plants
- Wineries & Breweries
|Polycast 700 Series Cheat Sheet|
|Channel Length||4 feet (48”), 2 feet (24”)|
|Channel Width (OD)||6.25"|
|Channel Width (ID)||4.25"|
|Max. Flow Rate||470 GPM|
|Outlet Sizes||4", 6", 4" bottom|
The same installation components used in the Polycast 600 Series are used in the 700 series. Installation chairs, end outlets, locking mechanisms and channel adapters are standard in both systems. High load grating options are available in slotted, solid and transverse slotted patterns to meet bicycle safety, heel-proof and ADA requirements.
Pipe Adapter End Caps
Polycast end caps are used to enclose or provide piping transitions to outlet or inlet ends of the channel whenever catch basins are not being used. End caps output to a 4" pipe. Material is ABS plastic.
Polymer concrete outlet caps are also available for 6" pipe. The 6" outlet caps are made to fit the 620, 620H, 625, 625N and 625H channels.
Installation chairs are the most efficient and economical means of setting a precast trench system. The installation chair supports the ends of the channel, aligns and locks the joints rigidly together, and prevents the channels from floating. Adjusting channel elevation is easy. One chair is required for every joint. Each chair is made from 1018 hot rolled steel and has a zinc plated finish.