Hubbell's Polycast 600 Series is one of the most prominent small commercial drains on the market. The 6.25" wide (OD) polymer concrete channels have a built-in .65 percent slope that allows the system to achieve flow rates of 470 GPM, higher than drainage systems of similar size. Channels are offered in 48" and 24" lengths. Channel edge protectors are available in galvanized steel and stainless steel. Polycast 600 Series also offers extender rails to increase the length of a trench drain run.
Polycast 600 Series installation chairs tighten the joints between channels while aligning and leveling the drainage run. Each installation chair is secured to the ground, ensuring that the channels will not float during the concrete pour.
The 600 Series shallow drainage system fits 5.25" wide grates ranging from load class A - F. These Polycast grates handle pedestrian to forklift traffic. The system offers fiberglass, cast iron, ductile iron and galvanized and stainless steel grates to meet the project's requirements. Grates are available in slotted, perforated, solid and transverse slotted patterns to meet bicycle safety, heel friendly and ADA requirements.
- Shopping Malls
- Sidewalks & Walkways
- Parking Lots & Garages
- Athletic Complexes
- Loading Docks
- Swimming Pools
- Wineries & Breweries
- Grocery Stores
|Polycast 600 Series Cheat Sheet|
|Channel Length||4 feet (48”), 2 feet (24”)|
|Channel Width (OD)||6.25"|
|Channel Width (ID)||4.25"|
|Max. Flow Rate||470 GPM|
|Outlet Sizes||4", 6", 4" bottom|
The stars and stripes pattern of the Patriot grate gives a patriotic flair to your trench drain system. Patriot is a ductile cast iron grate for the polymer concrete Polycast 500, 600, and 700 Series trench drain systems by Hubbell and the SS600 stainless steel drainage system by Trench Drain Systems. Part# DG0692.
Now produced by Trench Drain Systems, the Patriot grate is ADA Compliant and Made in USA!
Load Class C. Painted black.
PolyGuard Edge Protectors
PolyGuard protects the exposed upper edge of the Polycast 600 series channel for unmatched strength and protection against chipping and scarring in frequent or heavy traffic. PolyGuard installs easily over the top edge of the channel and covers the upper horizontal and vertical surfaces.
PolyGuard is available in 48" and 24" lengths in galvanized and stainless steel.
Pipe Adapter End Caps
Polycast end caps are used to enclose or provide piping transitions to outlet or inlet ends of the channel whenever catch basins are not being used. End caps output to a 4" pipe. Material is ABS plastic.
Polymer concrete outlet caps are also available for 6" pipe. The 6" outlet caps are made to fit the 620, 620H, 625, 625N and 625H channels.
Installation chairs are the most efficient and economical means of setting a precast trench system. The installation chair supports the ends of the channel, aligns and locks the joints rigidly together, and prevents the channels from floating. Adjusting channel elevation is easy. One chair is required for every joint. Each chair is made from 1018 hot rolled steel and has a zinc plated finish.
- Polycast 600 Series Flyer
- Polycast 600 Channel Data
- 600 Series Corrosion Resistance Guide
- Installation Manual 600/700 Series
- DG0669 SS HD Bar Grate
- DG0669H SS HD Bar Grate
- DG0675HD Brochure
- DG0692 Patriot Grate
- DP650 Catch Basin Specs
- DP651 Catch Basin Specs
- DP653OB DP543SB Catch Basin Specs
- DP653SB Catch Basin Specs
- DP750 Catch Basin Specs
- DP751 Catch Basin Specs
- Polycast DG0700AA
- Polycast DG0700PE
- Polycast Accessories